Matthew Calderon

If your factory Bose system has no audio with a PAC module, the amplifier turn-on circuit may be overloaded. These vehicles have 3 amps and an antenna booster. Follow these steps to fix the issue.A...

If you are experiencing GPS issues with a Stinger radio, follow the troubleshooting steps below to sort out the problem.Can the GPS antenna see the satellites in the sky?The GPS antenna shouldn't h...

If the radio doesn’t activate the backup camera screen when the vehicle is in reverse, it may indicate that the reverse wire has not been properly connected. On the radio-side harness of the PAC in...

The DIP switches used in PAC interface modules are product-dependent. Refer to the instructions for the certain product you are installing. These switches tell the module how it should behave or wh...

The CSS12 is a power noise filter designed for low-current devices such as radios and audio processors. It is not suitable for use with amplifiers or high-current applications.Specifications:Wide-f...

These amplifiers have a different ANC input connector. The ANC-CH02 bypass harness included with the APSUB-CH42 is incompatible with these amplifiers.Applicable vehicles: Jeep Grand Cherokee WL 21-...

In certain Jeeps, you may find the camera guidelines are missing. This is due to a new camera that Jeep has started using. The PAC camera module–RPA-HD1–must be updated. Follow the steps below to u...

If you encounter a situation where there is no audio output, and you find that toggling the key restores the audio, follow the steps outlined below to resolve this issue.Identify the Blue/White wir...

The LPH T-harness allows you to install aftermarket amplifiers without modifying the factory harness. The LPH T-Harness is intended for use with a line output converter (LOC), but can also be conne...

If the kit is not working correctly, please follow these steps to resolve the issue.Applicable Kits: JK11RB12, SRK-JK11H, SRK-JK11HX, SRX-JK11128, RB10JK11K, RB10JK11HP, RB10JK11XOpen the hood and ...