Matthew Calderon

If you find the kit is acting erratic or the factory camera is not working, follow these steps to possibly correct the issue(s).Open the hood and locate the fuse box next to the battery. Remove the...

To add a camera(s) to a Heigh10+, Horizon10, or Horizon12, follow these steps.Connect the power and ground wires from the camera(s) to the power and ground wires on the kit labeled “Aftermarket Cam...

If you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bo...

If you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bo...

If the gauges are only partially working, this may be due to missing CAN data information. To solve this problem, reset the PAC RadioPro CAN data interface. There are two different methods for rese...

In Bose-equipped vehicles, all audio components are connected in a loop. If an audio component is missing, you will not have sound. For this reason, the SRK-GM14HX provides jumpers to remove unnece...

In Bose-equipped vehicles, all audio components are connected in a loop. If an audio component is missing, you will not have sound. For this reason, the RP5-GM51 / GM6A-RST provides jumpers to remo...

If the climate control buttons work but not exactly right, the factory climate components may be out of sync. Follow these steps to re-sync the components.Reinstall the factory radio.Start the vehi...

If you hear music from all of the speakers but not when faded to the front, that indicates the AP4-CH41 interface wasn’t programmed or the programming didn't take. Follow these steps to program the...

If the radio doesn’t activate the backup camera screen when the vehicle is in reverse, it may indicate that the reverse wire has not been properly connected. On the radio-side harness of the PAC in...