Wrangler JK / JKU 2011-2018: Gauges somewhat working (DEPRECATED)

If the gauges only work partially, it may be due to missing CAN data. To fix this, reset the PAC RadioPro CAN data interface using one of two methods. Both require the Jeep to be running.

Applicable part numbers: SRK-JK11H, SRK-JK11HX, SRX-JK11128

Update: There is now a permanent fix for this problem. Click Here

Method 1

1. With the PAC RadioPro interface visible, locate the blue program button on the side of the interface.
2. Press and hold the program button until the LED blinks red, then let go. The radio and PAC interface will reboot. After the radio reboots, the gauges should be working.

Method 2

1. Navigate to the Installer Settings on the radio.
   • For the Heigh10:  settings / system settings / installer settings (0052) / advanced vehicle settings / about /
   • For the Heigh10+ and Horizon radios:  settings / installer (top right tab) / PAC advanced settings / Application Info /
2. Select “Factory Reset” on the RadioPro.

Search Keywords:  gauges not working, gauges inoperable, ch1a-srk, jeep, offroad, off-road