Matthew Calderon

Instructions on how to look up your vehicle, set up your module, and understand the wiring page in the video below. This applies to any of the following modules:  SWI-RC-1, SWI-CP2, SWI-CP5, C4RAD,...

Some users have reported no Bluetooth Audio When Using the Voice button on the Steering Wheel to Launch a Call. However, the audio works as expected when initiating the call from the phone or the f...

Overview This article covers how to fix "not having any left side audio" when installing an aftermarket radio using the RP4-FD11.Cause: There was an error in a production run of harnesses that has ...

This article covers how to wire up a standard five pin SPDT (single pole double throw) relay. A relay can be used to boost current, turn something on/off, or reverse polarity on a trigger.The Stand...

If you have installed the PAC RPK4-CH4101 into a 2013 Ram and are having issues with the temperature setting on the HVAC screen, please follow the procedure below to update your Radio PRO to a diff...

This article is to explain the process of properly wiring an aftermarket radio harness using the RP4-CH11, CH1A-RSX, C2R-CHY4, and LCCHXX series radio replacement modules into factory amplified Dod...

This video will show you how to set up the many different camera triggers and their settings on the Stinger Heigh10 when used with the SRK-JK11EH kit in your Jeep JK.

This video will show you how to set up the many different camera triggers and their settings on the Stinger Heigh10 when used with the SRK-JW18EH kit in your Jeep JL / JT.

In 2020 we decided to make a redesign of the RP5 module lineup along with some maintenance and feature additions. This change led to the usage of a similar module housing that we have used in other...

If you come across navigation signal wires with colors that do not match the instructions, please reference the tech brief below for clarification.