Matthew Calderon

This kit combines the audio and chime signals, similar to how the factory system works. When using turn signals, the audio volume lowers so the chime signals can be heard. This applies to all chime...

If the volume knob has never worked, or worked but quit shortly after installation, follow these steps to correct the problem.Start the vehicle.On the radio, navigate to Settings / Load Defaults.Se...

If the steering wheel control (SWC) buttons do not work with a PAC RadioPro interface, follow these steps to correct the problem.Verify the connections:Make sure the correct steering wheel connecti...

If the steering wheel control (SWC) buttons do not work with a PAC RadioPro interface, follow these steps to correct the problem.Verify the connections:Make sure the correct steering wheel connecti...

The VS41 is a powerful yet simple device for manipulating a single camera input. It can be used with an aftermarket radio, or any monitor or video adapter that accepts a standard definition NTSC ca...

The VS41 is a powerful yet simple device for manipulating a single camera input. It can be used with an aftermarket radio, or any monitor or video adapter that accepts a standard definition NTSC ca...

If you find the kit is acting erratic or the factory camera is not working, follow these steps to possibly correct the issue(s).Open the hood and locate the fuse box next to the battery. Remove the...

To add a camera(s) to a Heigh10+, Horizon10, or Horizon12, follow these steps.Connect the power and ground wires from the camera(s) to the power and ground wires on the kit labeled “Aftermarket Cam...

If you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bo...

If you experience both issues, the connectors for the radio and the PAC data interface may be mixed up. On the PAC interface, locate the Radio Harness connector. This connector is labeled at the bo...