Matthew Calderon

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified.Connect the speaker wiresLocate the speaker connector harness from the PAC inter...

This update tutorial is for PAC interfaces that use a Micro-B USB cable for updating. For PAC interfaces that use the older 5-pin update port follow the instructions in this link.In this example we...

This update tutorial is for PAC interfaces that use a Micro-B USB cable for updating. For PAC interfaces that use the older 5-pin update port follow the instructions in this link.In this example we...

This kit merges audio and chime signals like the factory system. When turn signals are on, the audio volume is lowered so chimes can be heard clearly. This applies to all chimes. If chimes are too ...

This kit merges audio and chime signals like the factory system. When turn signals are on, the audio volume is lowered so chimes can be heard clearly. This applies to all chimes. If chimes are too ...

If the steering wheel control (SWC) buttons do not work with a PAC RadioPro interface, follow these steps to correct the problem.Verify the connections:Make sure the correct steering wheel connecti...

The VS41 is a powerful yet simple device for manipulating a single camera input. It can be used with an aftermarket radio, or any monitor or video adapter that accepts a standard-definition NTSC ca...

If the kit is not working properly or the factory camera stops working, try these steps to fix the issue.Open the hood and locate the fuse box next to the battery. Remove the radio fuse for 5 secon...

If both issues occur, the radio and PAC module connectors might be swapped. Applicable part numbers: SR-RUN10H, SR-TAC16H, SR-TUN14H On the PAC module, locate the Radio Harness connector. This conn...

In Bose-equipped vehicles, all audio components are connected in a loop. If an audio component is missing, you will not have sound. For this reason, the kit provides jumpers to remove unnecessary a...