Matthew Calderon

The SE-P14 and SE-P24 navigation cards are designed for use with the Stinger Heigh10, Heigh10+, Horizon10, and Horizon12 radios. Please follow the steps below to update the cards.Update Procedure ...

If the PAC module isn't working, make sure it's updated with the latest firmware. This update reflects the new CAN data Chrysler is now using.Applicable vehicles: Jeep Grand Cherokee 2021+, Grand W...

This tutorial explains how to add a “highs” amp to a Stinger integrated radio kit. The vehicle must be non-amplified. Installation InstructionsConnect the speaker wiresLocate the speaker connector ...

This update tutorial is for PAC interfaces that use a Micro-B USB cable for updating. For PAC interfaces that use the older 5-pin update port follow the instructions in this link.In this example we...

This update tutorial is for PAC interfaces that use a Micro-B USB cable for updating. For PAC interfaces that use the older 5-pin update port follow the instructions in this link.In this example we...

This kit merges audio and chime signals like the factory system. When turn signals are on, the audio volume is lowered so chimes can be heard clearly. This applies to all chimes. If chimes are too ...

This kit merges audio and chime signals like the factory system. When turn signals are on, the audio volume is lowered so chimes can be heard clearly. This applies to all chimes. If chimes are too ...

If the steering wheel control (SWC) buttons do not work with a PAC RadioPro interface, follow these steps to correct the problem.Verify the connections:Make sure the correct steering wheel connecti...

The VS41 is a powerful yet simple device for manipulating a single camera input. It can be used with an aftermarket radio, or any monitor or video adapter that accepts a standard-definition NTSC ca...

If the kit isn't working properly or the factory camera stops working, try these steps to fix the issue. Troubleshooting StepsOpen the hood and locate the fuse box next to the battery. Remove the r...